• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 377 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

reference design PMP3522

Joy Tan
Expert 1175 points
Other Parts Discussed in Thread: TPS92010, UCC28600

Hello,

May I know reference deisgn PMP3522 is mean for TPS92010 or UCC28600?

http://www.ti.com/tool/pmp3522

As indicate over description is TPS92010 but documents in BOM and schematic part number is UCC28600 under document for PMP3522?

Pls confirm.

Thanks,

Joy

Description

The PMP3522 is a non-dimmable LED lighting reference design that uses the TPS92010 high efficiency LED lighting controller. It uses a PFC SEPIC topology and operates from a wide 80-280VAC input. The referece board layout is circular to fit the base of a downlight fixture.

  • 0
    TI__Genius 15910 points

    I believe the PMP3522 was designed before the TPS92010 was available and therefore used the UC28600.  Today, the design would use the TPS92010 and be supported by the Lighting Power Products group.  The documentation has not been updated to reflect the preferred part number for this lighting design.