Increasing current capability using LMZ14203H power modules

Ken Gardner

Prodigy 10 points

Other Parts Discussed in Thread: LMZ14203H, UCC39002, LMZ23608

Is there any way in which I can run two LMZ14203H power modules in parallel to increas current capability?

over 12 years ago

0 Allan Fisher over 12 years ago

TI__Intellectual 1160 points

Hello Ken,

Unfortunately the LMZ14203H modules are not designed to work in parallel. The LMZ23608/10 power modules are specifically designed to do this, but the output voltage maximum is 6V. A load sharing controller such as the UCC39002 may also work.

Regards,

Allan

Power management

Power management forum

Increasing current capability using LMZ14203H power modules