Hi,
There are several 48V->12V power module in the customer's board, and UC3902 is considered current sharing on 12V.
As there is no remote sense pin in the power module, is that ok to connect ADJ pin to the FB of the module?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
There are several 48V->12V power module in the customer's board, and UC3902 is considered current sharing on 12V.
As there is no remote sense pin in the power module, is that ok to connect ADJ pin to the FB of the module?