• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 302 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS56720 Question about I2C

HM
Intellectual 460 points
Other Parts Discussed in Thread: TPS56720

Hi,

I have a question about I2C on TPS56720.

When I2C function is not used,  SCL and SDA should be "pull-down", and A0 and A1 should be "open".  Is it correct?

Best Regards,

Hide