• State
  • Locked Locked
  • Replies 0 replies
  • Subscribers 61 subscribers
  • Views 163 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM395 on high side switch as low side is controlled by TLC5940.

Mrinal Guchait1
Prodigy 10 points
Other Parts Discussed in Thread: LM395, TLC5940

Hi,


I'm trying to build an LED cube where LOW side switching is carried by TLC5940 and HIGH side switching is carried by LM395.
Will HIGH side switching be stable using LM395?        [I know I can use P-channel MOSFET]

Supply: VCC = 5V & GND = 0V

LOAD = 5V; BASE < 5V