Replacement part for the MCP1253

Jared Becker

Other Parts Discussed in Thread: TPS60150, REG710-33

Hi team,

Do we have a part that can replace the MCP1253? I looked on our cross reference search, but i didn't see any matches that were inductorless charge pumps.

Please let me know.

Thanks,

Jared

over 8 years ago

0 JohnTucker over 8 years ago

TI__Guru**** 191445 points

Can you post your input and output requirements? Any special features you need?

0 Jared Becker over 8 years ago in reply to JohnTucker

TI__Genius 11665 points

I do not have specific input and output requirements. I believe the converter converts from 5V down to 3.3V, but I am not sure about that. The special feature would be the inductorless charge pump.

Thanks,
Jared

0 Michael Helmlinger over 8 years ago in reply to Jared Becker

TI__Expert 5055 points

Hi Jared,

it would be great to get more details of the power requirements. (Vin, Vout, Load...)

For 5Vout the TPS60150 could replace the MCP part.

For 3.3Vout the REG710-33 is an option but the maximum output current is 60mA.

Looking forward for more details.

Thanks & Regards,
Michael

Power management

Power management forum

Replacement part for the MCP1253