This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LM3102 Cvcc guidance in datasheet

Hello,

In the datasheet, Cvcc is recommended (One place says "should", another says "must"??) to be no smaller than 680nF.  I have a nitpick clarification question so as to avoid potentially overdoing that capacitor.  Is this datasheet stating that the selected value should be at least 680nF (and a good quality ceramic), or that the actual capacitance value itself (after tolerance, temperature, applied voltage, etc.) needs to always stay above 680nF?

Thanks.