TPS51363 Negative power supply output

Xiao Zhu2

Other Parts Discussed in Thread: TPS51363, TPS40055

Hello Team

We want to design a DCDC converter. The demand is 12v input , -5v voltage and 8A output. We plan use TPS51363. i am not sure if the device can do it. Could you help double check it and give us some advise? Thank you.

over 7 years ago

0 JohnTucker over 7 years ago

TI__Guru**** 191445 points

You have to de-rate the current by a factor of 1-D for inverting buck boost topology. I don't believe you can get 8 A output at 12 v to -5 V conversion.

0 Xiao Zhu2 over 7 years ago in reply to JohnTucker

TI__Expert 3215 points

Could you recommend a devices which meet the requirement? Thank you.

0 JohnTucker over 7 years ago in reply to Xiao Zhu2

TI__Guru**** 191445 points

I would look at TPS40055.

0 Yuchang Zhang over 7 years ago in reply to JohnTucker

TI__Mastermind 18510 points

Agree with Tucker, and first, 51363 Max output is just 2V, and also we tried to change 51363 EVM from buck to buck-boost inverter, it can work, we set it 1.35Vout, and test switch node, when add heavy loading, there is double pulse happen. looks the loop is already not stable.

Power management

Power management forum

TPS51363 Negative power supply output