• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 637 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS68470 GUI software

Logan Lin
Intellectual 340 points
Other Parts Discussed in Thread: TPS68470, IPG-UI, USB2ANY

Hello Sir:

I can't found TPS68470 GUI software on the website,

Can you provide it?

And, the control should be using USB-to-ANY(HPA665), but I can't found the datasheet for USB-to-ANY,

I need to know the pin define so that I can connect the I2C interface,

thanks a lot.

  • 0
    TI__Expert 5450 points
    Logan,

    The GUI for this device is not yet available. However, to communicate with the device over I2C you can start with the IPG-UI GUI which is available at http://www.ti.com/tool/IPG-UI. Using that GUI you can select the Blank-I2C-device project to have a generic register map for read and write. You will need to set the device address appropriately depending on your I2C_ICA and I2C_ICB pin settings. I will work on making a more device specific support package for the IPG-UI for this device as well.

    The USB2ANY should connect to the board at connector J21 which is keyed so that the ribbon cable only fits one way.

    Sincerely,
    Chase
  • 0
    TI__Expert 5450 points
    Logan,

    I'm sorry, I made a mistake. The TPS68470 is already included in the IPG-UI. You can select that device from the device selection list to get a register map for the TPS68470.

    Sincerely,
    Chase
  • 0 in reply to Chase Maupin
    Intellectual 340 points

    HI Chase:

    Yes, I can found TPS68470 at IPG-UI.

    about the USB2ANY, because  I need to make connection with customer's board, but I don't know the pin define for I2C-CLK, DATA,

    But anyway,   at TPS68470 EVM schematic, I can mapping J21 to find CLK and DATA.

    thanks a lot!