Hi Guys
Would it be possible to confirm the input/leakage current of EN1 and EN2 pins for TPS62737
I am trying to determine external resistor values on these pins to minimize permanent load to battery.
Thanks
Regards
Rodney
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Guys
Would it be possible to confirm the input/leakage current of EN1 and EN2 pins for TPS62737
I am trying to determine external resistor values on these pins to minimize permanent load to battery.
Thanks
Regards
Rodney
Rodney,
You would have to drive them externally or leave a pull-up/ pull-down resistor depending on your application.
Regards,
gautham