Other Parts Discussed in Thread: BQ24113, BQ24133
We are using BQ24103 Battery charger for 2 cell battery pack. whenever battery goes in deep discharge mode , battery charger is not able to charge BAT from pre-charge current.
BAT is charging in fast charge mode in the current scenario till 8.25V after that current decrease till 133mA i.e termination current set by ISET2 Pin.
I checked E2E community for this issue but i don't get any relevant answer from there for this issue.please help here ASAP.
Please find attached SCH of battery charger.
Please help me with the same