• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 63 subscribers
  • Views 1037 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AUTOCRANKSIM-EVM: AUTOCRANKSIM-EVM

LeoChen
Intellectual 500 points
Part Number: AUTOCRANKSIM-EVM

How many and what Automotive factory AUTOCRANKSIM-EVM could support? i can't find it clearly in "HVL068A Cranking Simulator User's Guide"

I find below Automotive factory Pulse support, if i buy a EVM, Do TI will support me GUI for this EVM?

.DaimlerChrysler Engine-Cranking Test Pulse, DC-10615
.Volkswagen Warm-Start Test Pulse, VW80000
.Volkswagen Cold-Start Test Pulse, VW80000

  • 0
    TI__Genius 16200 points

    Hello Leo,

    The User's Guide for this board shows the 3 pulses it supports in figures 3, 4, and 5.  You can check this to see what are the profiles that it can generate.

    There is no GUI for this board, the board is controlled by hardware which can be toggled by the user.  Section 2.2.2 of the user's guide describes the function of each of these controls.

    Regards,
    Karl

  • 0 in reply to Karl Wallinger
    Intellectual 500 points
    Dear Karl,
    Thanks for feedback. Except 3 pulses(.DaimlerChrysler Engine-Cranking Test Pulse, DC-10615
    .Volkswagen Warm-Start Test Pulse, VW80000
    .Volkswagen Cold-Start Test Pulse, VW80000), i want to know whether Ti could support other software to support other automotive factory's pulses.
  • 0 in reply to LeoChen
    TI__Genius 16200 points

    Hello Leo,

    The firmware is located on the PMP7233 product page under the Software section.  The board uses an MSP430 to create these profiles, so you can download this firmware, update it for any profile that you want using code composer studio, and flash the updated firmware to create a different profile.

    Regards,
    Karl