BQ20Z65-R1_BQEVSW-SW: Need Copy of the tool

Tim Drake

Part Number: BQ20Z65-R1
Other Parts Discussed in Thread: BQ20Z65, BQ40Z50-R2

HI,

I need to develop a test process for a board that includes the bq20Z65 gas gauge IC. The eval SW BQ20Z65-R1_BQEVSW-SW is called out for calibration (among other things). TIs web page for this part says that it is Not Available. Is this EVSW available anywhere? Is it not available because the bq20z65 is not recommended for new designs?

Thanks

Tim

over 6 years ago

0 Onyx Ahiakwo over 6 years ago

TI__Guru* 76230 points

Tim

I would recommend using the replacement device for this bq20z65 gauge which is NRND. The replacement gauge is the bq40z50-R2.

However see the link for the tool below.

1212.sluc177.exe

Make sure to install as an administrator.

thanks

Onyx

0 Tim Drake over 6 years ago in reply to Onyx Ahiakwo

Prodigy 20 points

Onyx,
Thanks for help.
I knew about the NRND, but this is not my design. I have only been asked to develop a test process. I will forward this information to the designer.
Tim

Power management

Power management forum

BQ20Z65-R1_BQEVSW-SW: Need Copy of the tool