• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 62 subscribers
  • Views 941 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS54302EVM-716: Schematic and Layout Design Files

David Buszmann
Prodigy 80 points
Part Number: TPS54302EVM-716
Other Parts Discussed in Thread: TPS54302

Hello,

I am looking to use the TPS54302 in our next design.  One of our main design goals is size.  I am wondering if TI could provide the design files so I can easily compare size and leverage the layout for optimal performance.

Thanks,

David

  • 0
    TI__Expert 5745 points

    I think WEBENCH can provide you the BOM, schematic and PCB. Then you will know the size of layout 

  • 0 in reply to Vental Mao
    Prodigy 80 points
    I was able to download the files through WEBENCH, so thank you. I am now running into an issue when executing the .bat file. I unzipped the folder, and double clicked on the .bat file. The first error I is that it doesn't recognize the allegro command. My guess is that I am executing it from the wrong location, but I am not sure. Can you please provide some more instructions for building the board file. Below is the .bat output. I replace the based root of the file locations with '...' for security reasons.



    ...\webench_board_exchange_design_5087592_1_Allegro\Allegro>cd ...\webench_board_exchange_design_5087592_1_Allegro\Allegro\

    ...\webench_board_exchange_design_5087592_1_Allegro\Allegro>allegro -s CustomShapes.scr
    'allegro' is not recognized as an internal or external command,
    operable program or batch file.

    ...\webench_board_exchange_design_5087592_1_Allegro\Allegro>pad_designer -s 2017-08-24_06-23-46_pads.scr
    'pad_designer' is not recognized as an internal or external command,
    operable program or batch file.

    ...\webench_board_exchange_design_5087592_1_Allegro\Allegro>CALL :checkfile "EX65Y32D32P.pad"
    Expected file "EX65Y32D32P.pad" not found
  • 0 in reply to David Buszmann
    TI__Expert 5745 points

    I'm not sure about your problem.For me, i usually click the CAD Export and select Altium Designer to get the schematic and layout.You can refer to TPS54302.zipthe attachment.