I have a power CCA from a piece of equipment for a 8 channel power supply of 450VDC and we are running into a wall. With the UC3842AN in the circuit, we looked up a few applications for this component, came across one that looked like it was beefed up to allow a 450VDC output on the top half of the output, and a -450VDC coming from the bottom half. We got it to start to even out with 484VDC output, but it doesn't was to go any lower than what it is now. If anyone has a idea of what it could possible me, please let us know what you all thinks the issue is that isn't allowing the voltage to drop to where it needs to be for the output, please?