Hi Team,
My customer considers to use bq24232H for 4.35V(full charge) battery.
He is studying what is occured if 4.20V(full charge) battery is connected to bq24232H by mistake.
I heard the 4.20V(full charge) battery has OVP protection and switches off when battery voltage increases more than 4.28V.
Is there any concern in this situation?
Best Regards,
Yaita / Japan disty
Hi Raheem-san,
Thank you for your support.
I would like to ask one more question.
I heard 4.20V(full charge) battery reduces charging current itself around VBAT=4.2V.
Is it possible case BQ24232H detects charge termination at VBAT=4.2V although regulation voltage of BQ24232H is 4.35V?
The following flow diagram doesn't shows condition of VBAT voltage for charge termination so I would like to ask it.
Best Regards,
Yaita / Japan disty
Hi Raheem-san,
Thank you for your kind support. I understand.
I would like to ask about Figure 26.
VBAT pin shows square wave after battery removed.
How much voltage (Vp-p) BQ24232H outputs in this case? 
I would also like to know if the voltage (Vp-p) is different between BQ24232H(4.35V) and BQ24230(4.2V).
Best Regards,
Yaita / Japan disty
