Hi,
I wanted to confirm what should be done with the SEQ_DLY pin on the TPS65265 if manual sequencing via the EN pins is used.
Is it OK to leave this pin floating?
Thanks,
Tom
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
I wanted to confirm what should be done with the SEQ_DLY pin on the TPS65265 if manual sequencing via the EN pins is used.
Is it OK to leave this pin floating?
Thanks,
Tom