• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 63 subscribers
  • Views 434 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

BQ24765: BQ24765 Question

dan lu
Prodigy 200 points
Part Number: BQ24765

Thanks,

Dan

  • 0
    TI__Guru*** 146695 points
    Dan,

    Upon reset, the ChargeVoltage() and ChargeCurrent() values are cleared (0) and the charger remains off until both the ChargeVoltage() and the ChargeCurrent() I2C commands are sent. During reset, both high side and low side fets remain off until the charger gets started.