This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LP5024EVM: LP5024 and USB2ANY problem

Part Number: LP5024EVM
Other Parts Discussed in Thread: USB2ANY

Hi I just bought LP5024EVM with USB2ANY. but It is not working. Can anybody help me ? 

I installed LP50 GUI soft on my Toshiba Lap top computer. I connected USB for USB2ANY, LP5024EVM with +5V power. but i can not make it. So I checked USB2ANY by USB2ANY Explore Soft from TI. 

It is communicated. and I did up date firmware so USB2ANY is working ok. So I connected LP5024EVM by 10 pin Ribbon cable by following PDF manual with +5V power. but i can not make it. 

I checked SDL SLC singal by Oscilloscope.  I changed parameter by LP50 GUI soft.  but no signal for Both lines. so how to check usb box and LP5024EVM board ? can anybody help ?