• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 202 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

UC2950: Is the UC2950 a suitable replacement for allegro UDN2950

Matthew Bonillas
Prodigy 10 points
Part Number: UC2950

I'm looking for a suitable replacement for the allegro UDN2950

I'm using two of them to make a full bridge driver. 

Thanks everyone!

  • 0
    TI__Guru**** 189399 points
    Hi Matthew,

    They certainly look similar. However, since I don't have knowledge of the Allegro part, please order some free samples from our website and see if it works in the application.

    I assume you are trying to fix a broken piece of equipment. If you are doing a new design, please share more details with us so we can recommend a modern device for you to use.