LM5009: LM5009

Michael Cyboran

Part Number: LM5009

I was reading in a locked thread for the LM5009 that conducted emissions may be reduced by adding a series resistor to the boot cap. What would be an appropriate resistor value?

over 5 years ago

0 Samuel Jaffe over 5 years ago

TI__Mastermind 25590 points

Michael,

I'd recommend starting with 10 ohms and going from there. We typically use between 2 and 10 ohms. Higher resistance means more power dissipation causing worse efficiency. But higher resistance means better EMI performance. You can try different values to optimize for your system.

Power management

Power management forum

LM5009: LM5009