Other Parts Discussed in Thread: PMP9522
Team,
We are working on a design for push-pull power supply with UCC2808A in an EV application. Do you have any recommendations for a transformer (ideally if fitting to the below specs)?
Thanks for your feedback and help.
TI Customer
- Transformer topology: Push-Pull
- Input voltage: 30V
- Output voltage 1: 25V
- Output current 1: mA
- Switching frequency: 500kHz
- Saturation flux density (at 125 °C): over 300mT
- Insulation (primary to secondary): reinforced (>1500VDC)
- Insulation (secondary to secondary): basic
- Clearance (primary to secondary): >7.3mm
- Creepage (primary to secondary): >7.6mm
- Temperature range: -40°C to 125°C, Automotive qualified