hello,
datasheet says the NC pin between VIn and GND (pin 23) need to be connected to GND to improve thermal and board level reliability.
Is it ok to leave it open for good pin FMEA?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hello,
datasheet says the NC pin between VIn and GND (pin 23) need to be connected to GND to improve thermal and board level reliability.
Is it ok to leave it open for good pin FMEA?
It is OK to leave pin #23 floating.