Hi, team.
What happens if a 4.2 V battery is connected by mistake while setting the bq24083 VBSEL = Hi (4.06 V)?
Is it determined that the battery is fully charged, and STAT1 and 2 become Chage Done?
Best Regards,
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, team.
What happens if a 4.2 V battery is connected by mistake while setting the bq24083 VBSEL = Hi (4.06 V)?
Is it determined that the battery is fully charged, and STAT1 and 2 become Chage Done?
Best Regards,
Hello
This would be correct, 4.06V would be the charge voltage and battery is fully charge at 4.2V.