LMG3410R050: Using UCC28070 interleaved CCM PFC

Tony Chuang

Prodigy 20 points

Part Number: LMG3410R050
Other Parts Discussed in Thread: UCC28070

If I want to use the LMG3410R050 in CCM Interleaved PFC. Anything that needs to be considered?

over 6 years ago

0 Masoud Beheshti61 over 6 years ago

TI__Genius 16571 points

Dear Tony,

Thank you for contacting TI.

I would like to highlight a reference design we have done for interleaved CCM. Although this design in not with the UCC28070, it provides a very example and detailed explanations for this topology. Please take a look and let us know if you have questions.

http://www.ti.com/tool/TIDM-1007

Thanks.

Masoud

0 Tony Chuang over 6 years ago in reply to Masoud Beheshti61

Prodigy 20 points

I understand that TI's advice is to use GAN at Interleaved CCM Totem Pole Bridgeless. Currently we use UCC28070 and Cool MOSFET if we use GAN MOSFET directly and increase the frequency. Is it possible to increase power in the current volume? Do you have a suggested reference?

0 Masoud Beheshti61 over 6 years ago in reply to Tony Chuang

TI__Genius 16571 points

Hello Tony,

UCC28070 is not a totem pole controller and is not the right controller for this application. I recommend considering one of the reference designs that we have for totem pole such as the one I linked on the previous response.

Thank you.

Masoud

Power management

Power management forum

LMG3410R050: Using UCC28070 interleaved CCM PFC