We are using TPS51120RHBR for Power supply management can you please verify the circuit of whole power supply also has a look on PCB layout of power supply. If needed I will be shared Gerber with you.
Input Power Supply is 24 V.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
We are using TPS51120RHBR for Power supply management can you please verify the circuit of whole power supply also has a look on PCB layout of power supply. If needed I will be shared Gerber with you.
Input Power Supply is 24 V.
What’s the loading spec? How many layer for PCB?
And leave your Email here, will give feedback next Monday.
Yuchang
PCB - 4 Layer!
{ 4 PT100 Sensor Port
8 (4-20) mA Analog current input port
2 (0-10V) Analog voltage input port
2 (24V) Digital Output Port
RS485 Modbus- 1 }
dheeraj@smartjoules.in is my mail id.
Since we will discuss this with Email, and I have sent Email to you and I will close this thread.
Yuchang