• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 63 subscribers
  • Views 168 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

LMG3410R070: LMG3411R070

Francisco Lauzurique1
Prodigy 40 points
Part Number: LMG3410R070
Other Parts Discussed in Thread: LMG3411R070

Hi,

I designed a SEPIC converter using the LMG3411R070. I am currently working on the control loop for the system and I was wondering if I could drive the transistor with the PWM from an FPGA. What is the required current for the PWM signal into the IN pin for the drivers?

Regards,

Francisco Lauzurique 

  • 0
    TI__Genius 16390 points

    Hello Francisco,

    Thank you for contacting us. 

    IN pin for LMG3411R070 has a 150kohm pull down resistor. Assuming 5V is applied to the IN pin, the current draw will be 33uA. If you are considering the current draw during switching transition, it will depend on the parasitic capacitance.

    Hope this answers your question.

    Regards,