• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 64 subscribers
  • Views 295 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLV751: Pin Configuration and Functions, and PCB layout guide foot print are not match

user4782171
Intellectual 1560 points
Part Number: TLV751
Other Parts Discussed in Thread: TLV752

Hi Team,

   Need your to check and clarify the issue that TLV75101PDSQR Pin Configuration and Functions, and PCB layout guide foot print are not match. 

   I think the PCB layout Example in Figure 44 shall be right: Please refer following for the issue and concern.

   Note. TLV752 has the same concerns.

   Best regards,

    Albert.

TLV751 issue.pptx

  • 0
    TI__Mastermind 23361 points

    Hi Albert, 

    We are aware of an error in the current datasheet about the pinout of the part. Please allow 1 business day for me to confirm it. 

    Regards, 
    Jason Song

  • 0 in reply to Jason Song
    TI__Mastermind 23361 points

    Hi Albert, 

    The pin out in the recommended layout is correct in Figure 44. The one in the pin configuration page is wrong. We are fixing this error and the updated datasheet should be online in the next week or two. 

    We apologize the inconvinence. 

    Regards, 
    Jason Song