UCC28C41: Model file for simulation

Vijay Kumar2

Part Number: UCC28C41

Dear TI,

I am designing a SMPS by using controller UCC28C41. I am not able to do simulation of my SMPS design in Altium, by using the model file which is available in TI website.

For your information please find my error screen shot below.

Please help me resolving this issue at the earliest.

Thanks/Regards

Vijay Kumar HT

over 4 years ago

0 Teng Feng over 4 years ago

TI__Genius 13660 points

Hi Vijay,

If you want to use the PSpice model for the device in Altium, please download the unencrypted PSpice model from the product folder. You will then have to follow the Altium instructions for how to install a PSpice model. You will still have to re-draw your schematic in Altium.

https://www.ti.com/lit/zip/slum520

Do you mind using Pspice or TINA for simulation? I have check the simulation on the page, they work well.

https://www.ti.com/product/UCC28C41/toolssoftware

Regards,

Teng

Power management

Power management forum

UCC28C41: Model file for simulation