Other Parts Discussed in Thread: BQ40Z60, BQSTUDIO
Hello,
I am unable to charge my battery pack.
I have attached the BQ40Z60 EVM's config file.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello,
I am unable to charge my battery pack.
I have attached the BQ40Z60 EVM's config file.
Hello Nishil,
Please provide a picture of your board setup.
Also, did you click Charger_En?
Hello Kang,
I cannot provide a photo of setup as it is confidential.
But the setup seems to be okay. I am able to see the correct charging voltage across VAC and GND.
And I am able to see the same voltage in BQStudio.
ACLW bit is toggling even though the charging voltage shown in BQStudio is greater than the set charging voltage.