Hi !
I am unable to simulate the CSD18563Q5A spice model (CSD18563Q5A.lib) available online. I am using the spectre simulator in Cadence Virtuoso's Analog design Environment (ADE).
Receive the following errors while simulating,
Warning from spectre in `cgs', during circuit read-in.
WARNING (SFE-1772): "./CSD18563Q5A.lib" 107: Found an unquoted ambiguous expression that contains the `*' character. Therefore, the part of the expression after `{-1e15*v' will be treated as a comment.
Warning from spectre in `cgd', during circuit read-in.
WARNING (SFE-1772): "./CSD18563Q5A.lib" 179: Found an unquoted ambiguous expression that contains the `*' character. Therefore, the part of the expression after `{-1e15*v' will be treated as a comment.
Warning from spectre in `cds', during circuit read-in.
WARNING (SFE-1772): "./CSD18563Q5A.lib" 251: Found an unquoted ambiguous expression that contains the `*' character. Therefore, the part of the expression after `{-1e15*v' will be treated as a comment.
Error found by spectre in `CSD18563Q5A', during circuit read-in.
ERROR (SFE-874): "./CSD18563Q5A.lib" 255: 21: Unexpected numeric value "11.00e-3". Expected end of file or end of line. Cannot run the simulation because of syntax error. Correct the error and rerun the simulation.
ERROR (SFE-874): "./CSD18563Q5A.lib" 256: 21: Unexpected numeric value "5.0e-5". Expected end of file or end of line. Cannot run the simulation because of syntax error. Correct the error and rerun the simulation.
Can you please share a spectre compliant spice/spectre model ?
Regards,
Bhushan