Other Parts Discussed in Thread: BQ24630
Hi Expert,
The BQ24630 has integrated the cycle-to-cycle overcurrent protection in.The DS say once 160% of the programmed charge current is triggered,the high-side gate drive turns off.
Would like to know how to create or simulate a 160% of the programmed charge current to trigger the OCP when the charge current is fixed by ISET1.
Thanks
Best regards,
Eric Lai
Field Application Engineer
Texas Instruments Taiwan Limited
O: +886-2-2175-2582
M: +886-909-262-582
E-Mail:Eric.Lai@ti.com