This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Abhishek,
I haven't hear back from you.
Do you any follow-up questions here ?
Thanks a lot
Regards,
Dorian
Hi Dorian
Actually got stuck in other baords design. During initial booting (few sec) when current may be less tha 20 mA how i can ensure that device doesn't face issue. Do you have any workaround this .
Hello Abhishek,
The only workaround you may use is either to program the device in Forced Conduction Mode or increase current at startup.
This is a limitation from HEF and DE mode.
Let me know if you have more questions.
Thanks,
Dorian
Hello Abhishek,
I haven't hear back from you.
Do you any follow-up questions here ?
Thanks a lot
Regards,
Dorian
Hi Dorian
You can close this thread . If there will be anything i wll raise new query
Hi Abhishek,
Sure.
Once you have new updates please post below.
Thank you!
Regards,
Dorian