Other Parts Discussed in Thread: INA169
Hi team,
My customer used our ina233 & ina169 for their current sensing design as below figure.
May I have your help to review it? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
For the INA233 schematic, you may want to move CC19 to the other side of RC11/RC15. For the INA169 circuit, you may want to select the correct gain resistors R842/844.
Depending on what GPIO1 is connected to and its function, it may be necessary to consider whether a comparator with hysteresis is needed.
Everything else is in line with typical configurations.
Regards, Guang