Dear Team
Good day!
Our customer want to use the TPS7A10 in their circuit , VIN 3.3V VOUT=1.8V IOUT=200mA , they want to confirm that , whether they can connect the Vbias and Vin together .
Best regards
Leon.liu
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Dear Team
Good day!
Our customer want to use the TPS7A10 in their circuit , VIN 3.3V VOUT=1.8V IOUT=200mA , they want to confirm that , whether they can connect the Vbias and Vin together .
Best regards
Leon.liu
Dear Team
Good day !
I had check the EVM board , it have the jumper between the VIn and Vbias , I think it is OK
Best regards
Leon.liu