LM63615-Q1: LM63615-Q1: LM63615-Q1 LTSpice Model

Hello Kevin,

I this a duplicate post?

LM63615-Q1: LM63615-Q1 LTSpice Model - Power management forum - Power management - TI E2E support fo...

e2e.ti.com

Part Number: LM63615-Q1 Hello, I see another person asked about the LTSpice model for LM63615-Q1 in the following forum: https://e2e.ti.com/support/power-management

Also, could you use the PSpice for TI tool or the Webench tool to do your simulation analysis for this device?

This is a duplicate post, but I'm posting this again here because Jason Arrigo e-mailed me today that he could not help me and he said I would be better off posting on this forum instead.  Jason said he was unsure how to transfer me to the correct contact.

Also, I should mention that another user request the unencrypted model in February for this exact same part and had their request resolved:

https://e2e.ti.com/support/power-management/f/196/t/884084

Thanks,

Kevin

Hello Kevin,

I know for a fact that Jason tried to help by contacting several teams internally, but unfortunately the model cannot be shared without NDA.

Please use PSpice for TI or webench to do your analysis.

Regards,

Denislav

Can you please explain how I can get an NDA?  I'm happy to sign a form if needed.

Jason told me it needed to be done through someone at TI's sales department, but that he was unsure how to get me to the correct contact.

Thanks,

Kevin

Hi Kevin,

Do you have a TI FAE/Sales supporting your company?

Regards,
Denislav

Denislav,

I work for a small startup company, so we do not have a TI sales person.  Is it possible to establish a TI sales contact?  If so, what would be the procedure for that?

Thanks,

Kevin

Hello Kevin,

I'd suggest contacting the customer support center and see if that's possible. Here is a link: www.ti.com/csc

http://www.ti.com/csc

Cheers,

Denislav