Other Parts Discussed in Thread: TLV61048
I want to simulate LM2622 on PSPICE for TI, but macro model was not found.
Is there way to get LM2622 macro?
Best regards,
Satoshi
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi Jasper
Thank you for pickup the TLV61048.
I confirming to customer about TLV61048.
Output current is below;
・-11V: 25mA
・11.5V: 75mA
・23V: 35mA
By the way, input current is suppose 700mA (with margin).
Best regards,
Satoshi
Hi Satoshi,
look good. you can refer to this application note for some calculation for charge pump circuit