I run test on LM2623 EVM. With empty load, apply 3.3V/300mA to the input. But the EVM sinks all the current and pull the input voltage to ~0V.
Any suggestion?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
I run test on LM2623 EVM. With empty load, apply 3.3V/300mA to the input. But the EVM sinks all the current and pull the input voltage to ~0V.
Any suggestion?
Hi Zack,
I have tried two new EVM. But the result is the same.
There is no HW short.
Hi Hugo,
Please make sure the power supply current limit is high enough. Could you share the startup waveform?