GERBER FILE FOR PMP4311

I have contacted the engineer who designed this product and requested these files.
I will email you as soon as I get a reply.
Regards,
John Griffin

Dear John,

Thanks for the prompt reply and efforts you are putting for procuring Gerber File for PMP4311.

Basically, I am interested in developing 10 kW PFC. However, as 10 kW PFC is directly not available I have decided to use 2 Nos PMP4311. 

As I was going through  the forum I came across a post where Mr. Ramanan Natrajan - TI Employee_ has shared this file with  Mr. David in  Oct., 2013.

Hoping that this will enable us to procure the file faster.

Best Regards, 

Sailesh Merchant

PMP4311 GERBER.zipHi Sailesh,

Gerbers attached.

Regards,

John

Dear John,

Thank you very much for the prompt reply. I really appreciate your efforts. This Gerber file will definitely help me in my project.

Meanwhile , would be glad if you can suggest me suitable ICs for the following uses :

1) Driver IC for IGBT to be used for 150 Amp module type IGBT .

2) PFC / PWM combine Controller for 500 Watts power ( and also for 1000 watts and 2500 watts power). Input is 100-250 volts AC, output required 390 volts variable PWM . Variable PWM output will be supplied to Step Up Transformer. It is not to be used for continuous use. It will be used only for 2-3 Secs every 30 minutes.

Best Regards,
Sailesh

John,   

Is there also a Design Tool (MathCAD or Excel) that is available for design changes and calculations for this design?

~Leonard 

  .