• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 62 subscribers
  • Views 561 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPS7A87: TPS7A87 -- Cross talk between 2 channels

Kenji Ninagawa
Expert 4190 points
Part Number: TPS7A87

Team,

 

Our customer has much interest for TPS7A87, but also has some concerns about cross talk between 2 channels.

Could you share any information/material ? Or could you give any guideline for this ?

 

 

よろしくお願いします。

Thanks and Regards,

Metropolitan (Tokyo) Area FAE  Kenji Ninagawa

  • 0
    TI__Guru 55940 points

    Hi Kenji,

    Figure 6 of the datasheet shows the channel-to-channel isolation over frequency.  As mentioned in the channel-to-channel isolation (crosstalk) section of the datasheet, proper PCB layout will minimize crosstalk. 

    Very Respectfully,

    Ryan