This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Part Number: TPS51120
Maybe I made the wrong choice of development tools / software, change it and ask again.
(I have the same question here. -> e2e.ti.com/.../835739)
I am considering a MOSFET controlled by TPS51120.Are there any limits on MOSFET delay parameters (rise time (tr), turn-on delay time (td (on)), fall time (tf), turn-off delay time (td (off))?I am thinking of selecting a FET using the following parameters: Can I use (1) and (2) below?
(1) TOSHIBA TPN2R903PL (tr = 4.7ns, td (on) = 12ns, tf = 8.2ns, td (off) = 30ns)(2) TOSHIBA TPCA8045-H (tr = 4.6ns, td (on) = 15ns, tf = 11ns, td (off) = 67ns)
Hi, based on your information, they can be used for TPS51120.
We are glad that we were able to resolve this issue, and will now proceed to close this thread.
If you have further questions related to this thread, you may click "Ask a related question" below. The newly created question will be automatically linked to this question.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs andembedded processors, along with software, tools and the industry’s largest sales/support staff.