Other Parts Discussed in Thread: BQSTUDIO
There are "CAL_TOGGLE", "EXIT_CAL" and "ENTER_CAL" commands on the bq34110 bqStudio.
What is the difference of these cammands?
Best Regards,
Kohei Sasaki
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
There are "EXIT_CAL" and "ENTER_CAL" commands when target ".bqz" is "0110_0_01-bq34110.bqz".
However it was only "CAL_TOGGLE" when target ".bqz" is "0110_0_02-bq34110.bqz".
I think the reason is depend on version.
Best Regards,
Kohei Sasaki