This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • TI Thinks Resolved

BQ76930: SYS_STAT register in ship mode

Intellectual 1180 points

Replies: 1

Views: 46

Part Number: BQ76930

If switching device from normal to ship mode, what will happen with SYS_STAT register values ?

Same for switching back from ship to normal mode ?

  • Hi Guenter,

    SHIP mode shuts down most device functions to put the device into the lowest power state. When coming out of SHIP mode into normal mode, you will find that registers settings are cleared and need to be re-written. This includes the SYS_STAT register values.

    Best regards,

    Matt

    Please click "This resolved my issue" button if this post answers your question

     TI provides design resources and design advice (including technical, schematic, code and/or system review) “as is” and with all faults.  All information in this or related correspondence is provided subject to TI’s Important Notice (http://www.ti.com/corp/docs/legal/important-notice.shtml).

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.