• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 62 subscribers
  • Views 214 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TPSM846C23DEVM-807: parallel version can work as single?

Adrian Ymeraj
Expert 3770 points
Part Number: TPSM846C23DEVM-807
Other Parts Discussed in Thread: TPSM846C23

Hi team,

I wanted to test the TPSM846C23 and noticed that two EVMs do exist. There is a single version and a parallel version that allows to output 70A, my question is: can I use this parallel version and use it as a single one? Thus having an output of 30-35A?

Thank you in advance.

Best regards,

Adrian

  • 0
    TI__Genius 17905 points

    Hi Adrian,

    There are multiple connections on the parallel EVM to enable the two-phase configuration (SYNC, VSHARE, ISHARE pins, among other modifications), so it would not be easy to modify the parallel EVM for single phase operation. You would likely have to remove the U2 TPSM846C23 device from the board to make it possible.

    I would recommend getting the single-phase EVM: http://www.ti.com/tool/TPSM846C23EVM-806

    Kris