Tool/software: WEBENCH® Design Tools
Attached is the Webench generated power supply design. I would like to verify for my application of 11.8V to 13.2V input voltage and 30V/300mA output, the components selected work.
The selected Fsw is 500kHz.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Tool/software: WEBENCH® Design Tools
Attached is the Webench generated power supply design. I would like to verify for my application of 11.8V to 13.2V input voltage and 30V/300mA output, the components selected work.
The selected Fsw is 500kHz.
Dear Sir,
Please change to Rcomp=4.2k ohm and Ccomp=100nF . And please place the 2.2uF output cap as close to the output side as possible.