BQ28Z610-R1: Production line programming tool

Andre Stelzer

Part Number: BQ28Z610-R1
Other Parts Discussed in Thread: BQSTUDIO, BQPRODUCTION, BQ28Z610

Hello,

i am seaching for a production line tool for the BQ28Z610-R1 like the one showed in the tutorial video from TI (training.ti.com/gauge-programming-fundamentals):

Where can i find it for my fuel gauge?

0 Wyatt Keller over 4 years ago

Hello Andre,

I think there was a problem with the picture uploaded. I believe you are talking about the SmartFlash and bqStudio?

bqStudio can be used to program all the gauges after you have the golden image and ChemID from configuring the gauge with all your parameters.

Sincerely,

Wyatt Keller

0 Andre Stelzer over 4 years ago in reply to Wyatt Keller

Hello,

yes i am talking about SmartFlash or BQProduction or similar tools.

Based on your answer i assume there is no simple programming tool (e.g. controlled via console) for the bq28z610 fuel gauge?

Best regards

0 Shirish over 4 years ago in reply to Andre Stelzer

I believe TI does not provide production tools. All tools are for demonstration.

This is based on reading of Section 9.1 of TI EVM sale terms and conditions

bqProduction can be found here. You can check if bq28z610 is supported

Power management forum