This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

  • Resolved

TPS756: Exposed Thermal Tab connection

Prodigy 60 points

Replies: 3

Views: 53

Part Number: TPS756

Hi,

I am using TPS756. I read the whole datasheet, but did not find where the Exposed Thermal Tab should be connected. Should I connect the Exposed Thermal Tab to GND?

Thanks

Zhao

  • Hi Zhao, 

    Most likely it would be grounded. But let me confirm it for you, are you talking about the KT or KCC?

    Regards, 
    Jason Song

    Please click the "Resolved" link at the bottom of this post if I have answered your question.

  • In reply to Jason Song:

    Hi Jason Song,

    Thanks for your reply. I am talking about the KTT(DDPAK). Please confirm it.

    Regards,

    Zhao

  • In reply to Zhao Chen:

    Hi Zhao, 

    I have reviewed the wire-bonding diagram, and yes, you can connect the thermal tab to GND. 

    Regards, 
    Jason

    Please click the "Resolved" link at the bottom of this post if I have answered your question.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.