Hi,
TPS610995 is fixed as 3.6V, but when switch on/off the input voltage, sometimes the output can up to 5.6V? why? here is the SCH:
thanks.
Yuan
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi,
TPS610995 is fixed as 3.6V, but when switch on/off the input voltage, sometimes the output can up to 5.6V? why? here is the SCH:
thanks.
Yuan
Hi Yuan:
Long time no see. The En need a clean and stable signal. If customer re-enable the converter in short after disable, there is a risk. It's better wait about 400us,
You can contact me via email about the details.