Hi team,
As you know the TPS568230 SW can survive -3v 10ns, but my customer's board is -4v, whether it has risks? Thanks.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi team,
As you know the TPS568230 SW can survive -3v 10ns, but my customer's board is -4v, whether it has risks? Thanks.
Hi Frank
It is recommended to stay with in the datasheet recommendations. Do you have a boot resistor in the schematic that you could leverage?
Regards,
Gerold
Hi Gerold,
The negative voltage is -4v, sorry for that. they didn't use a boot resistor there. Thanks.
Hi Frank,
I have send you the response through email.
So i will close this thread.
Thanks,
Lishuang