My customer is analyzing fault condition and impact to the system.
Is there any negative effect assumed in terms of EMC, due to PAD open fault?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
for TPS57060, the thermal PAD don't have any voltage generate on it.so theoretically, it should not affect the EMC performance, but it will affect the chip temperature. in practical, the thermal pad is float, so not sure whether there is some affection on the high frequency RE side.
All content and materials on this site are provided "as is". TI and its respective suppliers and providers of content make no representations about the suitability of these materials for any purpose and disclaim all warranties and conditions with regard to these materials, including but not limited to all implied warranties and conditions of merchantability, fitness for a particular purpose, title and non-infringement of any third party intellectual property right. No license, either express or implied, by estoppel or otherwise, is granted by TI. Use of the information on this site may require a license from a third party, or a license from TI.
TI is a global semiconductor design and manufacturing company. Innovate with 100,000+ analog ICs and
embedded processors, along with software, tools and the industry’s largest sales/support staff.